8 Water Heater Maintenance Tips
A water heater is an appliance which has made our life much easier. We have completely become reliant on opening the faucet and getting hot water whenever we need.
They are not only energy efficient but also completely safe. They are highly durable which is an added advantage. However, if you do not maintain it properly, it will require frequent repairs.
Don’t you want to always enjoy the ability to get hot water at the drop of the hat? If yes, it is necessary to follow a few water heater maintenance tips to keep it in proper shape. We will highlight below some simple tips which you need to follow from time to time.
1. Flush the water heater periodically:
As you use the water heater day in day out, sediments are accumulated at the bottom of the tank. The first and foremost maintenance tip which you need to follow is to eliminate these sediments. If they continue accumulating, it can result in corrosion. That is why it is important to flush out the water heater tank periodically.
The procedure to do so is pretty simple. You have to place a bucket near the outlet to drain the water. Once you are able to drain out the entire water, you have to again release freshwater into the tank in order to stir up the sediments. You have to again drain out that water. You have to repeat this procedure until you get completely clean water in the bucket at the outlet. Once you get that, you have to close the outlet and refill the tank and use it as desired.
2. Consider lowering the water temperature:
Most of us always keep the water heater thermostat at the highest possible setting in order to get scorching hot water when needed. The problem is that this not only consumes more energy but also increases the risk of scalding. That is why it is a good idea to lower the temperature of the water heater.
When you decrease the temperature of the water heater by 10 F, it can result in 5% savings in electricity. Thus, it is economical as well. If you plan on travelling, it is a good idea to select the lowest possible temperature settings on the water heater thermostat before moving outdoors.
This will help you save a significant amount of electricity. This will also ensure that the water heater is working at reduced pressure. Thus, it will certainly increase the life of the water heater.
3. Insulate the pipes:
When the water heater is running at maximum intensity/efficiency at all times, the pressure on the entire mechanism will always be on the higher side. The perfect solution to this problem is to provide proper insulation wherever possible. This ensures that the outdoor temperature does not impact the heated water. As a result, you will be able to use the water heater at a comparatively lower temperature.
You can use a 3/8 inch foam pipe installation in order to insulate the pipes. You have to use this foam on the pipes wherever possible. Applying the insulation to the pipes is not that much of a difficult task. You can do it yourself. With the help of this insulation, the water will remain at the desired temperature for a longer period of time.
The weather outside will not be able to cool it off when the water is passing through the pipes. This will allow you to get the desired water temperature without having to set the thermostat at the highest level.
4. Insulate the water heater:
Similarly, you can insulate the water heater as well. You can opt for the foil covered bubble wrap in order to insulate the water heater. The foil will not allow the outside weather to impact the water heater. You have to just make sure that the top is not covered.
The insulation will decrease the energy consumption of the heater, as efficiency will go up. You can not only save money by doing so but also the durability of the water heater will be increased.
5. Check the Temperature and Pressure Relief Valve:
The pressure release valve is built into the water heater tank in order to relieve some pressure whenever required. You have to place a bucket near the outlet of this valve. You have to shift the valve in the upper direction. It will release some water which will also reduce the pressure on the water tank. It will automatically move to its original position once the required amount of water is released.
In case, water keeps on flowing, it is a good idea to drain off half the tank and change the valve. The water flowing consistently is a sign that the valve might be malfunctioning.
6. Check the Anode rod:
In order to ensure that the anode rod is proper, you have to check it from time to time. First of all, you have to pump out a few gallons of water. Thereafter, you have to unscrew the rod head in order to pull out the anode rod. You have to make sure that you are wearing proper working gloves while doing so.
If the rod is less than 0.5 inches thick or if it is coated entirely with calcium, it is a good idea to buy a new anode rod. Once you have performed the procedure, you have to put the rod back into the tank and you have to tighten it securely. As long as the anode rod is proper, the water heater will be able to heat the water efficiently.
7. Create a water heater maintenance checklist:
Most of the people like to perform water heater maintenance by themselves. In such a case, it is a good idea to always prepare a proper water heater maintenance checklist. This will ensure that none of the steps are missed.
If this sounds like a lot of work to you, you can even hire any water heater maintenance company in Surrey or in your vicinity to conduct the maintenance from time to time. This means that you will not have to devote your own time in order to look after the water heater.
8. Do not skip the water heater maintenance schedule:
Ideally, the water heater maintenance tips should be followed on a periodic basis. It is a good idea to follow all of these tips every 6 months. You should not miss the schedule. If you end up missing the schedule, it is a good idea to get it done as soon as possible. This will ensure that before the break down of the water heater due to any problem, you are able to maintain it and get the problem fixed.
As a result, with the help of proactive repair work, you will be able to keep your water heater functional at all points in time. This will save you a lot of headaches and also increase the durability of the water heater.
So, instead of getting the water heater repaired only when there is some or the other problem or a breakdown, it is a good idea to follow these water heater maintenance tips. With the help of these 8 tips, you will be able to increase the durability of your water heater and always keep it functional. As a result, you will be able to easily get hot water at the drop of the hat.